NSN 3020-00-144-4713 · NIIN 001444713 · FSC 3020
NO DASHES 3020001444713
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.992 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.094 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.218 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.393 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.3430 |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 375.0 AND BRINELL STANDARD MAXIMUM 425.0 |
| ABSA | SPLINE QUANTITY | 11 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.9060 |
| AJLA | TEETH QUANTITY | 29 |
| AAQL | BODY STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| CWTR | HUB STYLE DESIGNATOR |