NSN 3020-00-147-5092 · NIIN 001475092 · FSC 3020
NO DASHES 3020001475092
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| FEAT | SPECIAL FEATURES | HUB IS ALSO STEPPED,0.375 IN.STEP DIA,0.031 IN.STEP LENGTH |
| CWNH | TOOTH FORM | STANDARD |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.9993 AND INCHES MAXIMUM 2.0000 |
| AJLA | TEETH QUANTITY | 96 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.311 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.250 |
| AAQL | BODY STYLE | |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.041 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303,COND A |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GC14-96-P2 | 23266 |
| DH1-T96Q12 | 29964 |
| C48S18-96Q12 | 29440 |
| LBS-E3-96Q12 | 56262 |
| C9533-1 | 81755 |
| H1-96-Q12 | 00141 |
| R21-96P2 | 00328 |
| LBS-E3-96Q12 | 0MTR9 |
| M48S96P2 | 12444 |
Supersedes
This item replaces cancelled NIIN 010083051. An older drawing citing one of those numbers resolves here.