NSN 3020-00-155-4007 · NIIN 001554007 · FSC 3020
NO DASHES 3020001554007
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 6 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.6000 |
| AJLA | TEETH QUANTITY | 56 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 42.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.799 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWPZ | HELIX ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.438 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.875 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.875 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.8595 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.966 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.625 |
| CWWN | END NOMINAL DIAMETER | BOTH ENDS INCHES 1.181 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.472 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.250 |
| CWXB | FIRST STEP NOMINAL DIAMETER | BOTH ENDS INCHES 1.500 |
| FEAT | SPECIAL FEATURES | BOTH ENDS COUNTERBORED,0.753 IN. DIA,1ST END 0.250 IN. DP,2ND END 1.812 IN. DP |
| MATT | MATERIAL | OVERALL STEEL COMP 4150 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 4150 |
| STYL | STYLE DESIGNATOR |