NSN 3020-00-159-0542 · NIIN 001590542 · FSC 3020
NO DASHES 3020001590542
In Stock
GEAR,WORM
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.2790 |
| ALPN | FACE TYPE | STRAIGHT |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.310 |
| CWPC | THREAD FORM QUANTITY | 1 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 3.2000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.188 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.156 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.562 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.219 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.125 |
| FEAT | SPECIAL FEATURES | 1ST END HUB SLOTTED AND NECKED DOWN INTO GEAR FACE;NECK 0.125 IN.OD BY 0.067 IN.LG;SLOT 0.031 IN.WIDE BY 0.047 IN.DP |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,GRADE 7 |
| STYL | STYLE DESIGNATOR |