NSN 3020-00-162-9230 · NIIN 001629230 · FSC 3020
NO DASHES 3020001629230
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 11.5000 |
| AJLA | TEETH QUANTITY | 23 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 12.500 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 2.750 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.378 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.501 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.855 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 5.625 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 1.505 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 3.750 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.500 |
| FEAT | SPECIAL FEATURES | BULLET TYPE CHAMFER LOCATED ON FIRST END OF EACH TOOTH,0.500 IN. INSIDE CORNER RADIUS LOCATED IN BORE ON FIRST END OF HUB |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SU9002 | 59690 |
| 9852A | 59690 |
| 9852AALTSU9002 | 59690 |
| SU9002 | 8E499 |
| 9852A | 8E499 |
| 9852AALTSU9002 | 8E499 |