NSN 3020-00-163-2345 · NIIN 001632345 · FSC 3020
NO DASHES 3020001632345
In Stock
GEAR,WORM WHEEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 14.4890 |
| AJLA | TEETH QUANTITY | 46 |
| ALPN | FACE TYPE | STRAIGHT |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C NOMINAL 16.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 15.218 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPL | MATING THREAD LEAD QUANTITY | 1 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 6.5998 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.125 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.625 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.250 |
| CWSN | KEYWAY NOMINAL WIDTH | FIRST END INCHES 0.874 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | FIRST END INCHES 0.957 |
| CWSW | TAPER MAJOR NOMINAL DIAMETER | FIRST END INCHES 3.001 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 4.500 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 5.000 |
| MATT | MATERIAL | OVERALL STEEL COMP 1045 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66,AISI TO SAE |
| STYL | STYLE DESIGNATOR |