NSN 3020-00-174-5510 · NIIN 001745510 · FSC 3020
NO DASHES 3020001745510
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.0000 |
| AJLA | TEETH QUANTITY | 36 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.2300 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.800 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWPZ | HELIX ANGLE | DEGREES 23.4167 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.328 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.236 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.472 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.249 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.378 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.309 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.000 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.000 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66,AISI TO SAE 8620H |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 001765544 · 005460297. An older drawing citing one of those numbers resolves here.