NSN 3020-00-178-0052 · NIIN 001780052 · FSC 3020
NO DASHES 3020001780052
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.2917 |
| AJLA | TEETH QUANTITY | 35 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.086 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.308 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.160 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.120 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.050 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.094 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.250 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.140 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.187 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.020 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 416 COND H |
| STYL | STYLE DESIGNATOR |