NSN 3020-00-195-8274 · NIIN 001958274 · FSC 3020
NO DASHES 3020001958274
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.813 |
| CWNH | TOOTH FORM | STANDARD |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.186 |
| FEAT | SPECIAL FEATURES | TWO CROSS DRILLED HOLES EACH HUB |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303,COND A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.3333 |
| AJLA | TEETH QUANTITY | 32 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.354 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.563 |