NSN 3020-00-197-5123 · NIIN 001975123 · FSC 3020
NO DASHES 3020001975123
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.237 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.375 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQD | PITCH ANGLE | DEGREES 52.0000 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.297 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.700 |
| ABSA | SPLINE QUANTITY | 13 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.2000 |
| AJLA | TEETH QUANTITY | 22 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | FIRST END INCHES NOMINAL 0.6500 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL A MINIMUM 81.0 AND ROCKWELL A MAXIMUM 84.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.938 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.745 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.187 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 0.7650 |