NSN 3020-00-197-5124 · NIIN 001975124 · FSC 3020
NO DASHES 3020001975124
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.218 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 43 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.437 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.000 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.089 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | FIRST END INCHES 0.046 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.526 |
| CWNH | TOOTH FORM | STANDARD |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 17 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.0710 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL A MINIMUM 81.0 AND ROCKWELL A MAXIMUM 84.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.182 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.9370 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 005330961. An older drawing citing one of those numbers resolves here.