NSN 3020-00-200-1635 · NIIN 002001635 · FSC 3020
NO DASHES 3020002001635
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.440 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.340 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL SUPERFICIAL 30-N MINIMUM 77.0 AND ROCKWELL SUPERFICIAL 30-N MAXIMUM 80.0 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.8000 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 40.0 |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 16 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0844 |
| AJLA | TEETH QUANTITY | 20 |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.460 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.830 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.320 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.060 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWNH | TOOTH FORM | STANDARD |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 116338 | 0AHP5 |
Supersedes
This item replaces cancelled NIIN 004402743. An older drawing citing one of those numbers resolves here.