NSN 3020-00-200-2067 · NIIN 002002067 · FSC 3020
NO DASHES 3020002002067
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.0120 |
| AAQL | BODY STYLE | |
| CWSN | KEYWAY NOMINAL WIDTH | FIRST END INCHES 0.253 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.862 |
| FEAT | SPECIAL FEATURES | TIMING MARK ON TOOTH,41 DEG 36 MIN 23 SEC CCW FROM CENTERLINE OF KEYWAY,IDLER GEAR TIMING MARK ON TOOTH 48 DEG CW FROM CENTERLINE OF KEYWAY,TWO PULLER @HOLES,3/8-16 UNC 2A,EQUALLY SPACED ON A 2-1/8 IN. DIA BOLT CIRLCE |
| MATT | MATERIAL | OVERALL STEEL COMP 1141 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAF 1141 |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 27.6 AND ROCKWELL C MAXIMUM 32.1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.203 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 37.1733 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.063 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.435 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| DF00H300 | 80072 |
| 50060 | 96046 |
| D600H00300 | 02978 |
| 10M079 | 07426 |
| 74909761 | 0AHU0 |
| CTD600H300 | 10695 |
| D600H-300 | 14351 |
| D600H00300 | 14351 |
Supersedes
This item replaces cancelled NIINs 003622207 · 005728876 · 009217115. An older drawing citing one of those numbers resolves here.