NSN 3020-00-203-1561 · NIIN 002031561 · FSC 3020
NO DASHES 3020002031561
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.7490 |
| AAQL | BODY STYLE | |
| FEAT | SPECIAL FEATURES | TWO SLOTS,0.097 IN. TO 0.100 IN. W,0.109 IN. DEEP,18 DEG APART CUT INTO END OF HUB TO ENGAGE INTEGRAL PIN OF SHAFT WHICH IS RETAINED BY NUT |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-268,T4 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.811 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.250 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.125 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.438 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.625 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003263726. An older drawing citing one of those numbers resolves here.