NSN 3020-00-204-1977 · NIIN 002041977 · FSC 3020
NO DASHES 3020002041977
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.063 |
| ANTP | BORE STYLE | |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.884 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.281 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.188 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.093 |
| AJLA | TEETH QUANTITY | 83 |
| MATT | MATERIAL | OVERALL COPPER ALLOY 360 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-626,ALLOY 360,1 TO 2H |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.312 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.8635 AND INCHES MAXIMUM 0.8645 |
| FEAT | SPECIAL FEATURES | MTG HOLES SPACED 180 DEG APART |