NSN 3020-00-215-7545 · NIIN 002157545 · FSC 3020
NO DASHES 3020002157545
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 22.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.105 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.090 |
| STYL | STYLE DESIGNATOR | |
| ABSA | SPLINE QUANTITY | 32 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.7270 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.013 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6266 |
| AAQL | BODY STYLE | |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL A MINIMUM 81.0 AND ROCKWELL A MAXIMUM 85.0 |
| BDZQ | BACKLASH DESIGNATION | GRADE A |
| CWNH | TOOTH FORM | STANDARD |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 2.350 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 2.0650 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.450 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.100 |
| CWTR | HUB STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 33 |