NSN 3020-00-215-8235 · NIIN 002158235 · FSC 3020
NO DASHES 3020002158235
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.156 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.119 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.344 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.2580 |
| AJLA | TEETH QUANTITY | 16 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B NOMINAL 98.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.288 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS 6,TYE A |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.171 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.156 |
| CWTR | HUB STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 93725 | 03848 |