NSN 3020-00-216-6104 · NIIN 002166104 · FSC 3020
NO DASHES 3020002166104
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWFR | NOMINAL OVERALL LENGTH | INCHES 3.086 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.897 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | INTERNAL INVOLUTE SPLINES IN FIRST END OF HUB,45 DEG ANGLE RELIEF AT BOTTOM OF BOTH COUNTERBORES |
| MATT | MATERIAL | OVERALL STEEL |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.6000 |
| AJLA | TEETH QUANTITY | 33 |
| ANTP | BORE STYLE | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 5.325 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | FIRST END INCHES 3.542 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | DEGREES 18.6500 |
| CWPZ | HELIX ANGLE | DEGREES 22.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.086 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 3.000 |
| CWTB | COUNTERBORE NOMINAL DEPTH | BOTH ENDS INCHES 0.736 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | BOTH ENDS INCHES 3.542 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003180907. An older drawing citing one of those numbers resolves here.