NSN 3020-00-217-7696 · NIIN 002177696 · FSC 3020
NO DASHES 3020002177696
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AJLA | TEETH QUANTITY | 30 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 3.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.245 |
| CWRB | BODY RECESS NOMINAL DEPTH | BOTH ENDS INCHES 0.258 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.385 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.610 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 1.185 |
| ABSA | SPLINE QUANTITY | 13 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.0000 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 35.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.163 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.630 |
| CWNH | TOOTH FORM | STUB |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6274 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.060 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.200 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.810 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 532174 | 28839 |