NSN 3020-00-229-6940 · NIIN 002296940 · FSC 3020
NO DASHES 3020002296940
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| STYL | STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.7493 AND INCHES MAXIMUM 1.7500 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AAQL | BODY STYLE | |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.250 |
| FEAT | SPECIAL FEATURES | HUB IS ALSO STEPPED,0.312 IN.DIA,0.031 IN.LG |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- 303S |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AJLA | TEETH QUANTITY | 126 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.281 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.406 |
| CWNH | TOOTH FORM | STANDARD |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GC22-126P2 | 23266 |
| B500-126P2 | 22488 |
| P23-126P2 | 00328 |
| H5-126Q12 | 00141 |
| 75-805326-3 | 07397 |
| P46S126P2 | 12444 |