NSN 3020-00-230-4486 · NIIN 002304486 · FSC 3020
NO DASHES 3020002304486
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.220 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.561 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.345 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.4990 AND INCHES MAXIMUM 1.5000 |
| AJLA | TEETH QUANTITY | 48 |
| SFTT | SURFACE TREATMENT | HUB PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | TEETH PLASTIC POLYAMIDE NYLON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | HUB FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TY 303 COND A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | TEETH MFR REF SINGLE MATERIAL RESPONSE L--410,CO- 6 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.438 |
| MATT | MATERIAL | HUB STEEL COMP 303 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 65652-09104-041 | 1HP47 |
| 65652-09104-041 | 27033 |
| 65652-09104-041 | 33068 |
| 65652-09104-041 | 61884 |
| 65652-09104-041 | 78286 |