NSN 3020-00-239-5511 · NIIN 002395511 · FSC 3020
NO DASHES 3020002395511
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 16.0000 |
| AJLA | TEETH QUANTITY | 80 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 13 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 72.0 AND ROCKWELL C MAXIMUM 9.0 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.500 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 16.043 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWPZ | HELIX ANGLE | DEGREES 14.9167 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.999 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.377 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.005 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 4.500 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 4.500 |
| FEAT | SPECIAL FEATURES | FIG 2 STAMPED ON GEAR SIDE ON LOWER CTR. LINE OF TOOTH SPACE OPPOSITE KEYWAY,FIG 3 STAMPED ON GEAR SIDE ON CENTER LINE OF TOOTH 150 DEG 45 MIN CCW FROM STAMPED FIG 2 |
| MATT | MATERIAL | OVERALL STEEL COMP 1035 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 1035 |
| STYL | STYLE DESIGNATOR |