NSN 3020-00-244-2568 · NIIN 002442568 · FSC 3020
NO DASHES 3020002442568
In Stock
GEAR,ANTIBACKLASH,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.9550 |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.2450 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.345 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.062 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.378 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.498 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.750 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.281 |
| FEAT | SPECIAL FEATURES | WITH CLAMP AND SET SCREW |
| MATT | MATERIAL | OVERALL ALUMINUM |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| C9205 | 10110 |
| PA23CM9205 | 10110 |
| 9205 | 10110 |
| 95942 | 10110 |
| 195942 | 10110 |
Supersedes
This item replaces cancelled NIIN 008829827. An older drawing citing one of those numbers resolves here.