NSN 3020-00-249-6189 · NIIN 002496189 · FSC 3020
NO DASHES 3020002496189
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | HUB ROCKWELL A MINIMUM 81.0 AND ROCKWELL A MAXIMUM 84.0 |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.156 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 12 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.8750 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.937 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.522 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.618 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.312 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.875 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL A MINIMUM 81.0 AND ROCKWELL A MAXIMUM 84.0 |
| CWQD | PITCH ANGLE | DEGREES 43.0000 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.6000 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6294 |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 23 |
| ANTP | BORE STYLE | |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | FIRST END INCHES 0.0540 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 005138665. An older drawing citing one of those numbers resolves here.