NSN 3020-00-249-9927 · NIIN 002499927 · FSC 3020
NO DASHES 3020002499927
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWNM | TOOTH DIRECTION | RIGHT |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 2.2500 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 65.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.715 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.408 |
| CWNH | TOOTH FORM | STANDARD |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 18 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.2055 |
| AJLA | TEETH QUANTITY | 18 |
| ANTP | BORE STYLE | |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.812 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.334 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.938 |
| FEAT | SPECIAL FEATURES | 9/32 IN. BY 30 DEG CHAMFER BOTH ENDS OF BORE,1/16 IN. BY 45 DEG CHAMFER BOTH SIDES OF GEAR TEETH |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.595 |
| CWPZ | HELIX ANGLE | DEGREES 20.6259 |