NSN 3020-00-250-0846 · NIIN 002500846 · FSC 3020
NO DASHES 3020002500846
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.5542 |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.773 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 16.2166 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.188 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.125 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.344 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 4.007 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.499 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 2.1294 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 5.125 |
| MATT | MATERIAL | OVERALL STEEL COMP 1335 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 1335 |
| STYL | STYLE DESIGNATOR |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NP11052PC5190 | 55509 |
| NP11145PC5190 | 55509 |
| NP11053PC5190 | 55509 |
| NP11099PC1 | 55509 |
| P211338 | 55509 |
| NP11051PC5190 | 55509 |
| NP11090PC20 | 55509 |
| NP11111PC20 | 55509 |
| NP11089PC20 | 55509 |
| P211338 | 76688 |
| P211338 | 17572 |
Supersedes
This item replaces cancelled NIIN 004168104. An older drawing citing one of those numbers resolves here.