NSN 3020-00-253-4350 · NIIN 002534350 · FSC 3020
NO DASHES 3020002534350
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.7215 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.8750 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.3125 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE 1515 |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQD | PITCH ANGLE | DEGREES 66.7998 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.2812 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.5000 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.3750 |
| MATT | MATERIAL | OVERALL STEEL COMP 8630 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.3750 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.4415 |
| CWTR | HUB STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 53.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 8.1000 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.5630 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 7.0000 |
| AJLA | TEETH QUANTITY | 28 |
| AAQL | BODY STYLE |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 007005126. An older drawing citing one of those numbers resolves here.