NSN 3020-00-269-9676 · NIIN 002699676 · FSC 3020
NO DASHES 3020002699676
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.844 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C NOMINAL 64.0 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.375 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.156 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.750 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.0937 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.2657 |
| AAQL | BODY STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.1478 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 45.0000 |
| MATT | MATERIAL | OVERALL STEEL COMP 1118 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66 |
| STYL | STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.0060 |
| AJLA | TEETH QUANTITY | 10 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| P124-2 | 17572 |
Supersedes
This item replaces cancelled NIIN 004168424. An older drawing citing one of those numbers resolves here.