NSN 3020-00-269-9681 · NIIN 002699681 · FSC 3020
NO DASHES 3020002699681
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-890,ALLOY 3 |
| STYL | STYLE DESIGNATOR | |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.9530 |
| CWTR | HUB STYLE DESIGNATOR | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 87.0 AND ROCKWELL C MAXIMUM 93.0 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.2000 |
| AJLA | TEETH QUANTITY | 26 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.3720 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.3750 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.1250 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.2500 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.5000 |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.7500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.4998 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.5990 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5355029A | 50024 |
| 16N600APC4 | 50024 |
| 35C4034-1 | 50024 |
| 16N615PC4 | 50024 |
| 16N700PC4 | 50024 |
| 16N800PC4 | 50024 |
| 35C4023-1 | 50024 |
| 16N603APC4 | 50024 |
| 5355029A | 7PZX0 |