NSN 3020-00-270-3512 · NIIN 002703512 · FSC 3020
NO DASHES 3020002703512
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.2550 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.127 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.156 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.2825 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.5000 |
| AJLA | TEETH QUANTITY | 16 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.5625 |
| CWNH | TOOTH FORM | STANDARD |
| STYL | STYLE DESIGNATOR | |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.3125 |
| FEAT | SPECIAL FEATURES | FOUR SAW CUTS 0.031 IN. W BY 0.266 IN. LG EQUAL SPACED IN HUB END |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2017 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 5,T4 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.2505 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.028 |