NSN 3020-00-273-1731 · NIIN 002731731 · FSC 3020
NO DASHES 3020002731731
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.0925 |
| AAQL | BODY STYLE | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.000 |
| MATT | MATERIAL | OVERALL COPPER ALLOY 360 |
| AJLA | TEETH QUANTITY | 122 |
| ANTP | BORE STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 3.3090 AND INCHES MAXIMUM 3.3120 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.219 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.6735 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AST--B-16 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | SECOND END INCHES 0.1990 |
| CWSW | TAPER MAJOR NOMINAL DIAMETER | SECOND END INCHES 0.3350 |
| CWTR | HUB STYLE DESIGNATOR | |
| CBBL | FEATURES PROVIDED | TAPERED KEYWAY |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 514580CSH2PC126 | 23667 |
| P515044APCALL | 23667 |
| 515044A | 23667 |
| 6505-3003816PC126 | 53711 |
| 6505-3003816PC126 | 80064 |