NSN 3020-00-273-1740 · NIIN 002731740 · FSC 3020
NO DASHES 3020002731740
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 2 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 4.9950 AND INCHES MAXIMUM 5.0000 |
| AJLA | TEETH QUANTITY | 120 |
| ANTP | BORE STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.081 |
| CWNH | TOOTH FORM | STANDARD |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.3750 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.000 |
| MATT | MATERIAL | OVERALL COPPER ALLOY 922 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-691,CO- 1 |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.164 |
| AAQL | BODY STYLE |
Cross-references
119 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.