NSN 3020-00-273-3333 · NIIN 002733333 · FSC 3020
NO DASHES 3020002733333
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.6500 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.4167 |
| STYL | STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.187 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.4377 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.562 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66,AISI TO SAE 8640 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 20 |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 200.0 AND BRINELL STANDARD MAXIMUM 250.0 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.699 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AJLA | TEETH QUANTITY | 66 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BUWEPSDWG1320110 | 44114 |
| BUWEPSDWG1320110 | 82522 |
| BUWEPSDWG1320110 | 08092 |
| BUWEPSDWG1320110 | 08KE6 |
| 1320110 | 10001 |