NSN 3020-00-273-4229 · NIIN 002734229 · FSC 3020
NO DASHES 3020002734229
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.375 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.500 |
| CWNH | TOOTH FORM | STANDARD |
| ANTP | BORE STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 8620H |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 8620H |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 6 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.8330 |
| AJLA | TEETH QUANTITY | 23 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.162 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.500 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 005948868. An older drawing citing one of those numbers resolves here.