NSN 3020-00-274-6068 · NIIN 002746068 · FSC 3020
NO DASHES 3020002746068
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.875 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.187 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.375 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.530 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.750 |
| AAQL | BODY STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.000 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 8620 |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.688 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.250 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 60.0 |
| AJLA | TEETH QUANTITY | 22 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.250 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 2.7490 AND INCHES MAXIMUM 2.7500 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2724 | 54641 |