NSN 3020-00-275-6965 · NIIN 002756965 · FSC 3020
NO DASHES 3020002756965
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.312 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.688 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66 |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 62.5200 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.844 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.8750 |
| AJLA | TEETH QUANTITY | 6 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.0270 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.500 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.125 |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.438 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.031 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.094 |
| CWNM | TOOTH DIRECTION | RIGHT |