NSN 3020-00-277-1058 · NIIN 002771058 · FSC 3020
NO DASHES 3020002771058
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.312 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.1577 |
| ANTP | BORE STYLE | |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| AJLA | TEETH QUANTITY | 32 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.6657 AND INCHES MAXIMUM 0.6667 |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.577 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.1865 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.2465 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.7078 |
| FEAT | SPECIAL FEATURES | COUNTERSUNK BORE OPPOSITE END OF HUB,60 DEG INCL ANGLE TO 0.300 IN. DIA |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.266 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.437 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 110090SPEC | 89557 |
| 110090 | 89557 |