NSN 3020-00-287-8468 · NIIN 002878468 · FSC 3020
NO DASHES 3020002878468
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.3330 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.500 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.250 |
| AJLA | TEETH QUANTITY | 26 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI 303 TO SAE 30303 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.100 |
| STYL | STYLE DESIGNATOR | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.000 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| AAQL | BODY STYLE | |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.625 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.500 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| B1303-2-86 | 72907 |
| 86 | 72907 |