NSN 3020-00-289-7491 · NIIN 002897491 · FSC 3020
NO DASHES 3020002897491
In Stock
GEAR,WORM
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTR | HUB STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.1878 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.562 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.1875 |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| CWPZ | HELIX ANGLE | DEGREES 45.9664 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.112 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 1 AND THREADED 1 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.3320 AND INCHES MAXIMUM 0.3330 |
| ALPN | FACE TYPE | STRAIGHT |
| ANTP | BORE STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.260 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.052 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.3746 |
| CWPC | THREAD FORM QUANTITY | 4 |