NSN 3020-00-294-7344 · NIIN 002947344 · FSC 3020
NO DASHES 3020002947344
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.093 |
| AJLA | TEETH QUANTITY | 128 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.166 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.060 |
| CWTR | HUB STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-B-16522,CLASS 2 |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.043 |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.875 |
| MATT | MATERIAL | OVERALL COPPER |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.218 |
| CWSW | TAPER MAJOR NOMINAL DIAMETER | FIRST END INCHES 0.350 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | FIRST END INCHES 0.222 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 3.9980 AND INCHES MAXIMUM 4.0000 |
| CWNH | TOOTH FORM | STANDARD |