NSN 3020-00-313-5449 · NIIN 003135449 · FSC 3020
NO DASHES 3020003135449
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.2200 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.900 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.4375 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.093 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.3430 |
| CWNH | TOOTH FORM | STANDARD |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.2500 |
| AJLA | TEETH QUANTITY | 60 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.2895 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | SECOND END INCHES 0.040 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | SECOND END INCHES 0.055 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.249 |
| FEAT | SPECIAL FEATURES | 1 0.104 IN. DIA HOLE IN FACE OF GEAR ON 0.437 IN. DIA BOLT CIRCLE; 2 0.112 IN DIA THREADED HOLES ON HUB FOR POSITIONING |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6 |
| SFTT | SURFACE TREATMENT | OVERALL OXIDE FILM |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | SECOND END INCHES 0.218 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 736592 | 56232 |