NSN 3020-00-314-8232 · NIIN 003148232 · FSC 3020
NO DASHES 3020003148232
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.406 |
| AJLA | TEETH QUANTITY | 12 |
| CWRB | BODY RECESS NOMINAL DEPTH | FIRST END INCHES 0.1177 |
| ABSA | SPLINE QUANTITY | 12 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.2000 |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.3080 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.616 |
| AAQL | BODY STYLE | |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 16.0000 |
| CWQD | PITCH ANGLE | DEGREES 29.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.484 |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 0.5000 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.872 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.3730 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.9080 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.6000 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 002496196. An older drawing citing one of those numbers resolves here.