NSN 3020-00-314-8249 · NIIN 003148249 · FSC 3020
NO DASHES 3020003148249
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6263 |
| STYL | STYLE DESIGNATOR | |
| CWQD | PITCH ANGLE | DEGREES 38.6665 |
| MATT | MATERIAL | OVERALL STEEL |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.170 |
| CWNM | TOOTH DIRECTION | LEFT |
| AJLA | TEETH QUANTITY | 32 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.9975 |
| FEAT | SPECIAL FEATURES | HUB EXTERNALLY SPLINED,15 TEETH,0.802 IN. MINOR DIA,0.9975 IN. MAJOR DIA,0.9375 IN. PITCH DIA,30.0 DEG PRESSURE ANGLE,0.400 IN. EFFECTIVE LENGTH |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL SUPERFICIAL 30-N MINIMUM 77.0 AND ROCKWELL SUPERFICIAL 30-N MAXIMUM 80.0 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.820 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.300 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.348 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.114 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.2000 |
| CBBL | FEATURES PROVIDED | ZEROL TEETH |
| ANTP | BORE STYLE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 221184 | 0AHP5 |
Supersedes
This item replaces cancelled NIIN 003907326. An older drawing citing one of those numbers resolves here.