NSN 3020-00-320-1297 · NIIN 003201297 · FSC 3020
NO DASHES 3020003201297
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 190.0 AND ROCKWELL C MAXIMUM 240.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 21.8660 |
| AJLA | TEETH QUANTITY | 64 |
| AAQL | BODY STYLE | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.5000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 4.003 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 1.000 |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 6.7500 |
| STYL | STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 3.188 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| ANTP | BORE STYLE | |
| FEAT | SPECIAL FEATURES | 2 0.625 IN. DIA THREADED HOLES 0N SECOND END HUB FOR POSITIONING |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 21.3330 |
| CWTR | HUB STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 32124-1 | 31577 |
| 32415PC54 | 31577 |
| 4402-7PC54 | 31577 |
| LCT6501S2601-93520PC54 | 53711 |
| LCT6501S2601-93520PC54 | 80064 |