NSN 3020-00-321-6403 · NIIN 003216403 · FSC 3020
NO DASHES 3020003216403
In Stock
PULLEY,FLAT
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANAL | TAPER BORE MAJOR DIAMETER | INCHES NOMINAL 1.001 |
| ALNC | HUB OUTSIDE DIAMETER | AA END INCHES NOMINAL 2.000 |
| ALNC | HUB OUTSIDE DIAMETER | BB END INCHES NOMINAL 1.625 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 5.437 AND INCHES MAXIMUM 5.446 |
| AHSF | FLANGE QUANTITY | 1 |
| AHYF | SECURING HOLE QUANTITY | 1 |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 0.251 AND INCHES MAXIMUM 0.253 |
| ADGE | BORE LENGTH | INCHES NOMINAL 1.500 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-I-666, GRADE 2 |
| NMBR | QUANTITY | 1 |
| SFTT | SURFACE TREATMENT | PHOSPHATE AND ENAMEL |
| STYL | STYLE DESIGNATOR | |
| BYDR | FLANGE LOCATION | OUTSIDE |
| BYDZ | PROTRUDING HUB CHARACTERISTIC | PLAIN |
| BYFF | SECURING LOCATION | PULLEY SURFACE |
| ANAM | TAPER BORE MINOR DIAMETER | INCHES NOMINAL 0.814 |
| AQPL | FACE WIDTH | INCHES NOMINAL 0.689 |
| ARJD | DESIGN FORM | WEBBED |
| ASBP | BORE TYPE | TAPERED |
| AEVF | DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY | INCHES NOMINAL 0.633 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.125 |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.250 |
| ABFF | FURNISHED ITEMS | KEYING FACILITY AND BORE |
| ABHE | OUTSIDE DIAMETER | INCHES NOMINAL 8.375 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.812 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 8.375 |
| BYZH | DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END | AA END INCHES NOMINAL 2.988 AND INCHES NOMINAL 0.375 |
| MATT | MATERIAL | OVERALL IRON CAST UNS F22200 |
| BSNP | SECURING METHOD | DRILLED HOLE |
| BXSU | WEB/SPOKE CONFIGURATION TO FACE CENTERLINE | NOT OFFSET |
| BYDP | RIM TYPE | SOLID |
| BFYT | HOLE LOCATION | ON PULLEY SURFACE |
| BSGK | KEYING FACILITY TYPE | KEYWAY |
| AWPJ | TAPER MAJOR DIAMETER LOCATION | AA END |