NSN 3020-00-333-4900 · NIIN 003334900 · FSC 3020
NO DASHES 3020003334900
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.251 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 3.2180 AND INCHES MAXIMUM 3.2190 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.063 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.811 |
| AAQL | BODY STYLE | |
| AJLA | TEETH QUANTITY | 27 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C NOMINAL 29.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.417 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 33.1171 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | FIRST END INCHES 1.0615 |
| CWRS | BORE NOMINAL DIAMETER | FIRST END INCHES 1.8745 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.750 |
| MATT | MATERIAL | OVERALL STEEL COMP 3140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66 |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 002628935. An older drawing citing one of those numbers resolves here.