NSN 3020-00-033-6017 · NIIN 000336017 · FSC 3020
NO DASHES 3020000336017
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.2825 |
| AJLA | TEETH QUANTITY | 26 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 57.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.678 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 17.5000 |
| CWPZ | HELIX ANGLE | DEGREES 17.5446 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.376 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.501 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.443 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.500 |
| FEAT | SPECIAL FEATURES | COUNTERBORE ON SECOND END W/ 2.530 IN. DIAM,0.375 IN. DEPTH |
| MATT | MATERIAL | OVERALL STEEL COMP 8620H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-46172 |
| SFTT | SURFACE TREATMENT | OVERALL CARBON |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 007346766. An older drawing citing one of those numbers resolves here.