NSN 3020-00-351-8993 · NIIN 003518993 · FSC 3020
NO DASHES 3020003518993
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.219 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.5625 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.2500 |
| ANTP | BORE STYLE | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.3120 |
| AJLA | TEETH QUANTITY | 68 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 1 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.1245 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.8750 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.062 |
| FEAT | SPECIAL FEATURES | INCL SHAFT 2-7/8 IN. LG |
| MATT | MATERIAL | OVERALL PLASTIC PHENOLIC |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.1875 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.5000 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.5020 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003334111. An older drawing citing one of those numbers resolves here.