NSN 3020-00-353-2750 · NIIN 003532750 · FSC 3020
NO DASHES 3020003532750
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 1.625 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.750 |
| MATT | MATERIAL | OVERALL STEEL COMP 4620 |
| AAQL | BODY STYLE | |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.2630 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.4850 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 2.7500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.6590 |
| CWTR | HUB STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 23 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 57.0 AND ROCKWELL C MAXIMUM 65.0 |
| ABSA | SPLINE QUANTITY | 10 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.6000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66 |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.8845 |
| CWNH | TOOTH FORM | STANDARD |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.375 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 57.0 AND ROCKWELL C MAXIMUM 65.0 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.