NSN 3020-00-355-4005 · NIIN 003554005 · FSC 3020
NO DASHES 3020003554005
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.313 |
| AJLA | TEETH QUANTITY | 13 |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 8720 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.6000 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | BODY ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.884 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.750 |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.117 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.266 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.742 |
| MATT | MATERIAL | OVERALL STEEL COMP 8720 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 6 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003180545. An older drawing citing one of those numbers resolves here.